Model: 1503061
THESE BELTS ARE HAMILTONBOBS PREMIUM BRAND
PLEASE CONFIRM THAT THIS IS THE PART YOU NEED BY MATCHING THE BELT OEM NUMBER TO THE ONE YOU ARE REPLACING. IF THERE IS ANY QUESTION, PLEASE CONTACT US SO WE CAN HELP YOU CONFIRM THE CORRECT FITMENT FOR YOUR EQUIPMENT.
5/8'' X 226.3''
FITS THE FOLLOWING ..
$41.00
Model: 1501093
NOTE THIS DOES NOT HAVE A PLATE GAP. IF YOU ARE LOOKING FOR A PRESSURE PLATE WITH THE PLATE GAP PLEASE SEE OUR OTHER LISTING ON EBAY
DIAMETER : 8.5 INCHES
LEVERS: 3
SPRINGS: 6
PLEASE NOTE: SOME MODELS OF TRACTORS USE SEVERAL DIFFERENT VARIETIES OF CLUTCH PRESSURE PLATE. FOR YOUR CONVENI..
$69.00
Model: 1501660
ID: 1.500''
OD: 2.734''
Width: 0.625'' Fits : ** Allis Chalmers ** - G ** Kubota ** - B4200 , B5100 , B6000 , B6100 , B7100 , L175 , L200 , L210 , L225 , L260 ** Massey Ferguson / Harris ** - Harris 11 Pony , Harris 16 Pacer ** Oliver ** - 60 Replaces OEM Numbers : 112073,1505,32150-14820,3..
$23.00
Model: 1503836
NOTE: THERE ARE MANY UNSPECIFIED APPLICATIONS FOR THIS YOKE ON MANY DIFFERENT MOWING SETUPS. PLEASE VERIFY THE DIMENSIONS OF THE CASTER YOKE YOU NEED AGAINST THE ITEM MEASUREMENT ILLUSTRATION IN THE 2ND LISTING PICTUREFITS THE FOLLOWING WOODS MOWERS WITH APPLICATIONS :59A-1 for IH A, Super A, 100, 1..
$85.00
Model: 1504195
NOMINAL ID : 0.75''
ACTUAL ID : 0.781''
OD : 1''
HEIGHT : 0.5''
NOTE: THERE ARE MANY UNSPECIFIED APPLICATIONS FOR THIS SPACER ON MANY DIFFERENT MOWING SETUPS. PLEASE VERIFY THE DIMENSIONS OF THE CASTER YOKE SHAFT YOU NEEDFITS THE FOLLOWING WOODS MOWERS WITH APPLICATIONS :59A-1 for IH A, Super A,..
$6.00
Model: 1503848
IN ADDITION TO THE FOLLOWING WOODS APPLICATIONS, THIS SEAL FITS THE TROY-BILT HORSE ROTOTILLER MODELS AS FOLLOWS : 12055, 12056, 12057, 12058, 12059, 12064, 12068, 12069, 12070, 12071, 12074, 12075, 12080, 12081, 12082, 12083, 12087, 12087C, 12088, 12088C, 12089, 12089C, 12090, 12090C, 12153, 12204
..
$8.00
Model: 1503849
FITS THE FOLLOWING WOODS MOWERS :114-2 Multi-Spindle42A-3 for IH-140, Farmall A42AA-1 for IH Farmall A42AC for Allis Chalmers A & B W/Belt Pulley42C-1 for IH Farmall Cub42C-2 for IH Farmall Cub42C-3 for IH Farmall Cub42C-4 for IH Farmall Cub42C-6 for IH Farmall Cub42CF-1 for IF Farmall Cub W/Fast Hi..
$54.00
Model: 1503838
THIS ITEM CONTAINS A LEFT AND RIGHT ARM + YOKE + WHEELS AS PICTURED
THERE ARE SOME EARLY VERSIONS OF THE LISTED MOWING SETUPS WHERE THE ARMS ARE LONGER. YOU MAY HAVE TO TAP NEW HOLES IN YOUR DECKTOP VERTICAL BRACE. YOU WILL KNOW YOU HAVE AN EARLY DECK IF THERE IS A RAISED VERTICAL RIDGE ON THE FRO..
$379.00
Model: 1503837
THIS ITEM CONTAINS A LEFT AND RIGHT ARM + YOKE AS PICTURED
THERE ARE SOME EARLY VERSIONS OF THE LISTED MOWING SETUPS WHERE THE ARMS ARE LONGER. YOU MAY HAVE TO TAP NEW HOLES IN YOUR DECKTOP VERTICAL BRACE. YOU WILL KNOW YOU HAVE AN EARLY DECK IF THERE IS A RAISED VERTICAL RIDGE ON THE FRONT EDGE O..
$311.00
Model: 1503424
HEIGHT : 11''
WIDTH : 18.5''
FRONT TO REAR : 18''
BETWEEN BRACKETS : 6''
3 - 10MM HOLES ON EACH SIDE
Fits : ** Kubota ** - B1550 , B1750 , B4200 , B5100 , B6100 , B7100 , G1800 , G1900 , GF1800 , K008 , L1501 , L175 , L185 , L200 , L2000 , L210 , L225 , L235 , L245 , L260 , L275 , L2900 , L..
$88.00
Model: 1503065
THESE BELTS ARE HAMILTONBOBS PREMIUM BRAND
PLEASE CONFIRM THAT THIS IS THE PART YOU NEED BY MATCHING THE BELT OEM NUMBER TO THE ONE YOU ARE REPLACING. IF THERE IS ANY QUESTION, PLEASE CONTACT US SO WE CAN HELP YOU CONFIRM THE CORRECT FITMENT FOR YOUR EQUIPMENT.
5/8'' X 207''
FITS THE FOLLOWING WO..
$20.00
Model: 1503066
THESE BELTS ARE HAMILTONBOBS PREMIUM BRAND
PLEASE CONFIRM THAT THIS IS THE PART YOU NEED BY MATCHING THE BELT OEM NUMBER TO THE ONE YOU ARE REPLACING. IF THERE IS ANY QUESTION, PLEASE CONTACT US SO WE CAN HELP YOU CONFIRM THE CORRECT FITMENT FOR YOUR EQUIPMENT.
5/8'' X 233.5''
FITS THE FOLLOWING ..
$20.00