Model: 1502520
PLEASE VERY CLOSELY COMPARE THE PICTURE ABOVE TO YOUR INJECTOR. THIS IS THE BANJO-TYPE INJECTOR. THERE WERE OTHER STYLES USED IN SOME TRACTORS.
PLEASE NOTE THESE DO NOT HAVE THE 2 TUBES COMING OUT OF THE SIDE OF THE TOP OF THE INJECTOR.
INJECTOR LENGTH END TO END : APPROXIMATELY 3.75''
FOR THE ..
$108.00
Model: 1502145
LENGTH: 85MM
TIP LENGTH: 22.5MM
THREAD: M10 x 1.25MM
HEX SIZE: 12MM Fits : ** Allis Chalmers ** - 5020 , 5030 , 6140 ** Bobcat ** - 843 ** Bolens ** - G192 , G194 ** Case ** - 235 , 245 , 255 , 265 , 275 , 410 Skid Steer , 420 Skid Steer , 420CT Skid Steer , D25 , D29 , D33 , D35 , D40 , D45 , ..
$34.00
Model: 1501861
PLEASE DO NOT PURCHASE ON MAKE AND MODEL ALONE. PLEASE NOTE THAT THERE CAN BE SEVERAL DIFFERENT SIZED FILTERS THAT CAN FIT ON ANY GIVEN MAKE AND MODEL. THERE CAN BE DIFFERENT SIZE FILTERS USED ON THE SAME MAKE AND MODEL DUE TO OPTIONS LIKE DIESEL/GAS, 3CYL/4CYL, TURBO/NO TURBO, ETC AND THEY ARE NOT ..
$26.00
Model: 1501660
ID: 1.500''
OD: 2.734''
Width: 0.625'' Fits : ** Allis Chalmers ** - G ** Kubota ** - B4200 , B5100 , B6000 , B6100 , B7100 , L175 , L200 , L210 , L225 , L260 ** Massey Ferguson / Harris ** - Harris 11 Pony , Harris 16 Pacer ** Oliver ** - 60 Replaces OEM Numbers : 112073,1505,32150-14820,3..
$23.00
Model: 1504282
PIPE FITTING OD : 1.625''FLANGE BOLT CENTERS : 2.64'' Fits : ** Kubota ** - L1501 , L175 , L185 , L2000 , L225 , L245 , L1801 , L1500 , L2201 Replaces OEM Numbers : 15221-12320,15221-12323,15221-12324,15221-12325..
$26.00
Model: 1502519
PLEASE VERY CLOSELY COMPARE THE PICTURE ABOVE TO YOUR INJECTOR. THIS IS THE BANJO-TYPE INJECTOR. THERE WERE OTHER STYLES USED IN SOME TRACTORS.
PLEASE NOTE THESE DO NOT HAVE THE 2 TUBES COMING OUT OF THE SIDE OF THE TOP OF THE INJECTOR.
INJECTOR LENGTH END TO END : APPROXIMATELY 3.75''
FOR THE ..
$27.00
Model: 1502144
LENGTH: 85MM
TIP LENGTH: 22.5MM
THREAD: M10 x 1.25MM
HEX SIZE: 12MM Fits : ** Allis Chalmers ** - 5020 , 5030 , 6140 ** Bobcat ** - 843 ** Bolens ** - G192 , G194 ** Case ** - 235 , 245 , 255 , 265 , 275 , 410 Skid Steer , 420 Skid Steer , 420CT Skid Steer , D25 , D29 , D33 , D35 , D40 , D45 , ..
$12.00
Model: 1503424
HEIGHT : 11''
WIDTH : 18.5''
FRONT TO REAR : 18''
BETWEEN BRACKETS : 6''
3 - 10MM HOLES ON EACH SIDE
Fits : ** Kubota ** - B1550 , B1750 , B4200 , B5100 , B6100 , B7100 , G1800 , G1900 , GF1800 , K008 , L1501 , L175 , L185 , L200 , L2000 , L210 , L225 , L235 , L245 , L260 , L275 , L2900 , L..
$88.00
Model: 1501767
NOTE! THESE WILL FIT THE GREY MARKET KUBOTA 1500 WITH SOME MODIFICATION.
THE HEIGHT OF THE COLUMN (BASE OF TUBE TO TOP OF STEERING WHEEL) IS 19''.
THE MOUNTING BOLT HOLE SPACING IS 5 1/8'' x 2 3/8''.
THE BOLT HOLES ARE 7/16''.
PITMAN ARM SHAFT -- 36 SPLINES TAPERED FROM .950 TO 1...
$187.00
Model: 1503835
NOTE : THIS KIT WILL UPGRADE 2 (TWO) YOKE/CASTERS ON THE LISTED MODELS WHEN DOING THE STANDARD INSTALL OR 1 (ONE) YOKE/CASTER IF DOING STANDARD AND OPTIONAL INSTALL.
FITS THE FOLLOWING WOODS MOWERS WITH APPLICATIONS
59A-1 for IH A, Super A, 100, 130, 14059A-2 for IH A, Super A, 100, 130, 14059AC f..
$22.00
Model: 1501008
THIS IS THE PULLEY THAT REDIRECTS THE DIRECTION OF THE BELT ON THE FOLLOWING DECKS.
NOTE THIS COMES WITH THE BEARING AS SHOWN IN PICTURE
O.D.: 4.5''
BEARING I.D.: 5/8''
FITS THE FOLLOWING WOODS MOWERS WITH APPLICATIONS :
348M180-1 for Mitsubishi 180348SBK-2 for Satoh Beaver III, Satoh ..
$58.00