Model: 1502145
LENGTH: 85MM
TIP LENGTH: 22.5MM
THREAD: M10 x 1.25MM
HEX SIZE: 12MM Fits : ** Allis Chalmers ** - 5020 , 5030 , 6140 ** Bobcat ** - 843 ** Bolens ** - G192 , G194 ** Case ** - 235 , 245 , 255 , 265 , 275 , 410 Skid Steer , 420 Skid Steer , 420CT Skid Steer , D25 , D29 , D33 , D35 , D40 , D45 , ..
$34.00
Model: 1501089
DIAMETER : 7.25 INCHES
PLEASE NOTE: SOME MODELS OF TRACTORS USE SEVERAL DIFFERENT VARIETIES OF CLUTCH PRESSURE PLATE. FOR YOUR CONVENIENCE, PLEASE BE SURE THE ABOVE DIMENSIONS/PICTURES MATCH YOUR NEED. THE ABOVE PICTURE IS THE EXACT CLUTCH PRESSURE PLATE YOU WILL RECEIVE. Fits : ** Allis Ch..
$54.00
Model: 1502144
LENGTH: 85MM
TIP LENGTH: 22.5MM
THREAD: M10 x 1.25MM
HEX SIZE: 12MM Fits : ** Allis Chalmers ** - 5020 , 5030 , 6140 ** Bobcat ** - 843 ** Bolens ** - G192 , G194 ** Case ** - 235 , 245 , 255 , 265 , 275 , 410 Skid Steer , 420 Skid Steer , 420CT Skid Steer , D25 , D29 , D33 , D35 , D40 , D45 , ..
$12.00
Model: 1503836
NOTE: THERE ARE MANY UNSPECIFIED APPLICATIONS FOR THIS YOKE ON MANY DIFFERENT MOWING SETUPS. PLEASE VERIFY THE DIMENSIONS OF THE CASTER YOKE YOU NEED AGAINST THE ITEM MEASUREMENT ILLUSTRATION IN THE 2ND LISTING PICTUREFITS THE FOLLOWING WOODS MOWERS WITH APPLICATIONS :59A-1 for IH A, Super A, 100, 1..
$85.00
Model: 1504195
NOMINAL ID : 0.75''
ACTUAL ID : 0.781''
OD : 1''
HEIGHT : 0.5''
NOTE: THERE ARE MANY UNSPECIFIED APPLICATIONS FOR THIS SPACER ON MANY DIFFERENT MOWING SETUPS. PLEASE VERIFY THE DIMENSIONS OF THE CASTER YOKE SHAFT YOU NEEDFITS THE FOLLOWING WOODS MOWERS WITH APPLICATIONS :59A-1 for IH A, Super A,..
$6.00
Model: 1503838
THIS ITEM CONTAINS A LEFT AND RIGHT ARM + YOKE + WHEELS AS PICTURED
THERE ARE SOME EARLY VERSIONS OF THE LISTED MOWING SETUPS WHERE THE ARMS ARE LONGER. YOU MAY HAVE TO TAP NEW HOLES IN YOUR DECKTOP VERTICAL BRACE. YOU WILL KNOW YOU HAVE AN EARLY DECK IF THERE IS A RAISED VERTICAL RIDGE ON THE FRO..
$379.00
Model: 1503837
THIS ITEM CONTAINS A LEFT AND RIGHT ARM + YOKE AS PICTURED
THERE ARE SOME EARLY VERSIONS OF THE LISTED MOWING SETUPS WHERE THE ARMS ARE LONGER. YOU MAY HAVE TO TAP NEW HOLES IN YOUR DECKTOP VERTICAL BRACE. YOU WILL KNOW YOU HAVE AN EARLY DECK IF THERE IS A RAISED VERTICAL RIDGE ON THE FRONT EDGE O..
$311.00
Model: 1504442
NOTE : SEAT COMES WITH BOLTS AND LOCK WASHERS TO SECURE BRACKETS TO SEAT BOTTOMDEPTH : 19''HEIGHT : 14''WIDTH : 16'' Fits : ** Allis Chalmers ** - 5015 , 5020 , 5030 , 5040 , 5045 , 5050 ** Case ** - 235 , 245 , 255 , 275 ** Deutz ** - 5215 , 5220 , 5230 ** Ford ** - 1120 , 1215 , 1220 , 1320 , 15..
$88.00
Model: 1105557
12 Volt
3 Terminal Fits : ** Allis Chalmers ** - 170 , 180 , D10 , D12 , D14 , D15 , D17 , D19 , D21 , Industrial I40 , Industrial I400 , Industrial I60 , Industrial I600 ** Case ** - 300B , 310 , 400B , 4210 , 4230 , 4240 , 430 , 440 , 441 , 450 Crawler , 470 , 500B , 530 , 540 , 541 , 570 , 600..
$28.00
Model: 1503066
THESE BELTS ARE HAMILTONBOBS PREMIUM BRAND
PLEASE CONFIRM THAT THIS IS THE PART YOU NEED BY MATCHING THE BELT OEM NUMBER TO THE ONE YOU ARE REPLACING. IF THERE IS ANY QUESTION, PLEASE CONTACT US SO WE CAN HELP YOU CONFIRM THE CORRECT FITMENT FOR YOUR EQUIPMENT.
5/8'' X 233.5''
FITS THE FOLLOWING ..
$20.00
Model: 1502920
THESE ARE PREMIUM RED PIRANHA BRAND BLADES, DESIGNED SPECIFICALLY FOR THE WOODS MOWER
LENGTH : 20''
MOUNTING HOLE : 5/8''
PLEASE VERIFY THE FOLLOWING : MOWER BLADES ARE FOR THE LISTED MOWER MODELS THAT WHEN VIEWED FROM ABOVE (OPERATOR'S SEAT) ROTATE COUNTER-CLOCKWISE. ADDITIONALLY, BOLT THAT H..
$78.00
Model: 1503835
NOTE : THIS KIT WILL UPGRADE 2 (TWO) YOKE/CASTERS ON THE LISTED MODELS WHEN DOING THE STANDARD INSTALL OR 1 (ONE) YOKE/CASTER IF DOING STANDARD AND OPTIONAL INSTALL.
FITS THE FOLLOWING WOODS MOWERS WITH APPLICATIONS
59A-1 for IH A, Super A, 100, 130, 14059A-2 for IH A, Super A, 100, 130, 14059AC f..
$22.00