Model: 1501783
- Fits : ** Ford ** - 2000 , 2100 , 2110 , 2120 , 2130 , 2131 , 2150 , 2300 , 2310 , 2600 , 2600V , 2610 , 3000 , 3055 , 3100 , 3110 , 3120 , 3150 , 3190 , 3300 , 3600 , 3600V , 3610 , 3900 , 4031 , 4040 , 4110 , 4140 , 4340 , 4410 , 4600 , 4600SU , Backhoe 420 , Industrial 230A , Industrial 231 ,..
$5.00
Model: 1503024
FOR TRACTORS WITH TWO GEAR SHIFT LEVERS Fits : ** Ford ** - 2000 , 2100 , 2120 , 2150 , 2300 , 2310 , 2600 , 2610 , 2810 , 2910 , 3000 , 3055 , 3100 , 3110 , 3120 , 3150 , 3190 , 3230 , 3300 , 3310 , 3400 , 3430 , 3500 , 3600 , 3610 , 3900 , 3910 , 3930 , 4000 , 4000SU , 4100 , 4110 , 4130 , 4140 ..
$9.00
Model: 1503136
OD : 3'' Fits : ** Ford ** - 2000 , 2100 , 2110 , 2120 , 2150 , 2300 , 2310 , 2600 , 2600V , 2610 , 2810 , 2910 , 3000 , 3055 , 3100 , 3110 , 3120 , 3150 , 3230 , 3300 , 3310 , 3330 , 3400 , 3430 , 3500 , 3600 , 3600V , 3610 , 3900 , 3910 , 3930 , 4000 , 4030 , 4100 , 4110 , 4130 , 4140 , 4200 , 4..
$6.00
Model: 1501591
NOTE : THIS KIT IS A SET OF FOUR (4) 1.25'' ID BUSHINGS. PLEASE CHECK ALL OF THE BUSHINGS ON YOUR SPINDLES. Fits : ** Allis Chalmers ** - B , C , CA , D10 , D12 , Industrial IB ** Ford ** - 2000 , 2031 , 2100 , 2111 , 2121 , 2131 , 2150 , 2300 , 2310 , 2600 , 2600V , 2610 , 2810 , 2910 , 2N , 300..
$19.00
New
Model: 1504174
PLEASE DO NOT PURCHASE ON MAKE AND MODEL ALONE. PLEASE NOTE THAT THERE CAN BE SEVERAL DIFFERENT SIZED FILTERS THAT CAN FIT ON ANY GIVEN MAKE AND MODEL. THERE CAN BE DIFFERENT SIZE FILTERS USED ON THE SAME MAKE AND MODEL DUE TO OPTIONS LIKE DIESEL/GAS, 3CYL/4CYL, TURBO/NO TURBO, ETC AND THEY ARE NOT ..
$33.00
Model: 1502341
PLEASE DO NOT PURCHASE ON MAKE AND MODEL ALONE. PLEASE NOTE THAT THERE CAN BE SEVERAL DIFFERENT SIZED FILTERS THAT CAN FIT ON ANY GIVEN MAKE AND MODEL. THERE CAN BE DIFFERENT SIZE FILTERS USED ON THE SAME MAKE AND MODEL DUE TO OPTIONS LIKE DIESEL/GAS, 3CYL/4CYL, TURBO/NO TURBO, ETC AND THEY ARE NOT ..
$20.00
Model: 1502060
FOR TRACTOR MODELS LISTED PRODUCED IN 1965 - 1974
PRIMED AND READY TO PAINT Fits : ** Ford ** - 2000 , 2100 , 2110 , 2120 , 2150 , 2300 , 2310 , 3000 , 3055 , 3100 , 3110 , 3120 , 3150 , 3300 , 3310 , 3330 , 3400 , 3500 , 4000 , 4110 , 4140 , 4190 , 4330 , 4340 , 4400 , 4410 , 5000 , 5100 , 53..
$26.00
Model: 1502909
NOTE : BRAKE SHAFT SEAL ON 2000 3-CYLINDER THROUGH TS100 FORD TRACTORS (1965 - 1993)
2 REQUIRED PER TRACTOR, SOLD INDIVIDUALLY
OD : 1.470''
ID : 0.925''
THICKNESS : 0.360''
Fits : ** Ford ** - 2000 , 2150 , 2300 , 2310 , 2600 , 2600V , 2810 , 2910 , 3000 , 3055 , 3120 , 3150 , 3190 , 330..
$6.00
Model: 1502470
TWO (2) SEALS USED FOR EACH OF THE LISTED APPLICATIONS. SOLD SEPARATELY.
ID : 1.125''
BORE : 1.561''
THICKNESS : 0.250'' Fits : ** Ford ** - 2000 , 2100 , 2110 , 2120 , 2300 , 2310 , 3000 , 3055 , 3100 , 3120 , 3150 , 3190 , 3300 , 3310 , 4000 , 4100 , 4110 , 4140 , 4190 , 4200 , 4410 , 5000 ,..
$8.00
Model: 1503207
- Fits : ** Ford ** - 2000 , 2110 , 2120 , 2300 , 2310 , 2600 , 2610 , 2810 , 2910 , 3000 , 3100 , 3120 , 3300 , 3310 , 3600 , 3610 , 3910 , 4000 , 4000SU , 4100 , 4110 , 4600 , 4600SU , 4610 , 5000 , 5100 , 5200 , 5600 , 5610 , 5900 , 6600 , 6610 , 7000 , 7100 , 7200 , 7600 , Industrial 231 , Ind..
$9.00
Model: 1503129
PLEASE DOUBLE CHECK THE BELOW DIMENSIONAL INFORMATION FOR THIS TOOL SO YOU GET THE CORRECT ONE FOR YOUR SETUP AND PROJECT.
THIS TOOL IS FOR 15 SPLINE TRANSMISSION DISCS
FIRST SPLINE : 1'' X 15 SPLINE
SECOND SPLINE : 1-7/8'' X 29 SPLINE
PILOT DIAMETER : 0.670'' Fits : ** Ford ** - 2300 , 2310 ..
$18.00
Model: 1501756
RIGID PLATE
DIAMETER : 11 INCHES
SPLINES: 10
CENTER DIAMETER: 1 INCH
PLEASE NOTE: SOME MODELS OF TRACTORS USE SEVERAL DIFFERENT VARIETIES OF CLUTCH PLATE. FOR YOUR CONVENIENCE, PLEASE BE SURE THE ABOVE DIMENSIONS/PICTURES MATCH YOUR NEED. THE ABOVE PICTURE IS THE EXACT CLUTCH PLATE YOU ..
$21.00