Model: 1501614
NOTE THAT THIS ITEM IS FOR SEALED BEAM HEAD LAMP APPLICATIONS.
DIAMETER: 4.4''
25 WATTS
6 VOLT Fits : ** Allis Chalmers ** - D10 , D12 , WC , WD , WD45 , WF ** Ford ** - 2000 , 2030 , 2031 , 2110TR , 2111 , 2120 , 2130 , 2131 , 4000 , 4030 , 4031 , 4040 , 4110TR , 4120 , 4121 , 4130 , 4131 ,..
$21.00
Model: 1501611
NOTE THAT THIS ITEM IS FOR SEALED BEAM HEAD LAMP APPLICATIONS.
DIAMETER: 4.4''
30 WATTS
6 VOLT Fits : ** Allis Chalmers ** - D10 , D12 , WC , WD , WD45 , WF ** Ford ** - 2000 , 2030 , 2031 , 2110TR , 2111 , 2120 , 2130 , 2131 , 4000 , 4030 , 4031 , 4040 , 4110TR , 4120 , 4121 , 4130 , 4131 ,..
$17.00
Model: 1501783
- Fits : ** Ford ** - 2000 , 2100 , 2110 , 2120 , 2130 , 2131 , 2150 , 2300 , 2310 , 2600 , 2600V , 2610 , 3000 , 3055 , 3100 , 3110 , 3120 , 3150 , 3190 , 3300 , 3600 , 3600V , 3610 , 3900 , 4031 , 4040 , 4110 , 4140 , 4340 , 4410 , 4600 , 4600SU , Backhoe 420 , Industrial 230A , Industrial 231 ,..
$5.00
Model: 1501781
FOR 3 OR 4 SPEED TRANSMISSIONS AND MODEL YEARS 1939-1964 Fits : ** Ford ** - 2000 , 2030 , 2031 , 2110 , 2111 , 2130 , 2131 , 2N , 4000 , 4030 , 4031 , 4040 , 4110 , 4121 , 4130 , 4131 , 4140 , 501 , 541 , 600 , 601 , 620 , 621 , 630 , 631 , 640 , 641 , 700 , 701 , 740 , 741 , 800 , 801 , 820 , 82..
$14.00
Model: 1501421
FOR TRACTORS WITH MANUAL STEERING AND REGULAR FRONT AXLE (1953 - 1964). 0.687''-18 LH THREAD, 3.875'' TO CENTER OF POST.
DUE TO VARYING STOCK FROM OUR SUPPLIERS, THESE MAY COME WITH A GREASE ZERK IN THE HEAD OR SEALED WITH NO GREASE ZERK (SELF LUBRICATING). IF YOU HAVE A PREFERENCE, PLEASE LET ..
$28.00
Model: 1501422
FOR TRACTORS WITH MANUAL STEERING AND REGULAR FRONT AXLE (1953 - 1964). 0.687''-18 RH THREAD, 4.250'' TO CENTER OF POST.
DUE TO VARYING STOCK FROM OUR SUPPLIERS, THESE MAY COME WITH A GREASE ZERK IN THE HEAD OR SEALED WITH NO GREASE ZERK (SELF LUBRICATING). IF YOU HAVE A PREFERENCE, PLEASE LET ..
$32.00
Model: 1503725
NOTE : STEERING SECTOR FELT SEAL ON LATE 8N THROUGH 4000 4-CYLINDER FORD TRACTORS (LATE 1949 - 1964)
2 REQUIRED PER TRACTOR
OD : 1.470''
ID : 0.925''
THICKNESS : 0.360'' Fits : ** Ford ** - 2000 , 2031 , 2131 , 4000 , 4030 , 4031 , 4120 , 4121 , 4130 , 4131 , 600 , 601 , 611 , 620 , 621 , 630 ..
$5.00
Model: 1501413
FITS TRACTOR MODELS WITH 4 CYLINDER GAS, LP, AND DIESEL ENGINES THROUGH 1964 Fits : ** Ford ** - 2000 , 2030 , 2031 , 2111 , 2130 , 2131 , 4000 , 4030 , 4031 , 4040 , 4110 , 4120 , 4121 , 4130 , 4140 , 501 , 541 , 600 , 601 , 611 , 620 , 621 , 630 , 631 , 640 , 641 , 650 , 651 , 660 , 661 , 671 , ..
$32.00
Model: 1501591
NOTE : THIS KIT IS A SET OF FOUR (4) 1.25'' ID BUSHINGS. PLEASE CHECK ALL OF THE BUSHINGS ON YOUR SPINDLES. Fits : ** Allis Chalmers ** - B , C , CA , D10 , D12 , Industrial IB ** Ford ** - 2000 , 2031 , 2100 , 2111 , 2121 , 2131 , 2150 , 2300 , 2310 , 2600 , 2600V , 2610 , 2810 , 2910 , 2N , 300..
$19.00
Model: 1501719
THE KIT CONTAINS THE FOLLOWING:
PRESSURE PLATE (WITH ADJUSTMENT BOLTS ON FINGERS)
CLUTCH DISC
CLUTCH RELEASE BEARING
PILOT BEARING
PRESSURE PLATE
DIAMETER : 9 INCHES
LEVERS: 3 - NOTE LEVER HAS WEIGHT AND BOLT
SPRINGS: 6
CLUTCH DISC
WOVEN - SPRING CENTER
DIAMETER : 9 INCHES
SPLI..
$105.00
Model: 1503085
THIS IS A BEARING AND CUP AS PICTURED.
PLEASE DOUBLE CHECK THE PART NUMBERS FOR YOUR APPLICATION AGAINST THE ONES IN THE DESCRIPTION TO DETERMINE THE FITMENT ON YOUR EQUIPMENT
BEARINGBORE : 2.625''RADIUS : 0.14''WIDTH : 1.183''
CUPOD : 4.438''RADIUS : 0.13''WIDTH : 0.938'' Fits : ** Case ** - M..
$11.00
Model: 1502549
PLEASE CHECK THAT YOUR CARBURETOR NUMBER MATCHES TO ONE ON THE FOLLOWING LIST
ZENITH CARBURETOR NUMBERS : 8503, 8561, 8627, 8928, 8981, 9167, 9318, 9635, 9725, 9748, 9749, 9750, 9752, 9805, 10002, 10034, 10386, 10432, 10441, 10498, 10514, 10522, 10535, 10536, 10537, 10586, 10595, 10609, 10610, 1062..
$21.00