Model: 1504123
PREMIUM RED PIRANHA SHIMS
HIGHER VISIBILITY FOR EASIER INSPECTION
ID : 32MM (SEE NOTE)
OD : 62MM
THICKNESS : 1.5MM
(10) - 32MM ID SHIMS FOR USE ON 30MM APPLICATIONS
NOTE : Shims are machined slightly oversized (32mm) for grease passage, easier installation, and fitment on worn pins
Fits : ..
$28.00
Model: 1504124
PREMIUM RED PIRANHA SHIMS
HIGHER VISIBILITY FOR EASIER INSPECTION
ID : 37MM (SEE NOTE)
OD : 71MM
THICKNESS : 1.5MM
(10) - 37MM ID SHIMS FOR USE ON 35MM APPLICATIONS
NOTE : Shims are machined slightly oversized (37mm) for grease passage, easier installation, and fitment on worn pins
Fits : ..
$30.00
Model: 1504126
PREMIUM RED PIRANHA SHIMS
HIGHER VISIBILITY FOR EASIER INSPECTION
ID : 46.5MM (SEE NOTE)
OD : 84MM
THICKNESS : 1.5MM
(10) - 46.5MM ID SHIMS FOR USE ON 45MM APPLICATIONS
NOTE : Shims are machined slightly oversized (46.5mm) for grease passage, easier installation, and fitment on worn pins
F..
$32.00
Model: 1504127
PREMIUM RED PIRANHA SHIMS
HIGHER VISIBILITY FOR EASIER INSPECTION
ID : 51.5MM (SEE NOTE)
OD : 90MM
THICKNESS : 1.5MM
(10) - 51.5MM ID SHIMS FOR USE ON 50MM APPLICATIONS
NOTE : Shims are machined slightly oversized (51.5mm) for grease passage, easier installation, and fitment on worn pins
F..
$34.00
Model: 1502105
PLEASE DO NOT PURCHASE ON MAKE AND MODEL ALONE. PLEASE NOTE THAT THERE CAN BE SEVERAL DIFFERENT SIZED FILTERS THAT CAN FIT ON ANY GIVEN MAKE AND MODEL. THERE CAN BE DIFFERENT SIZE FILTERS USED ON THE SAME MAKE AND MODEL DUE TO OPTIONS LIKE DIESEL/GAS, 3CYL/4CYL, TURBO/NO TURBO, ETC AND THEY ARE NOT ..
$22.00
Model: 1503639
Height : 7.25''
OD : 3.5''
ID : 1.875''
THE FOLLOWING LIST ARE FOR MODELS WHICH USE THE OUTER FILTER BUT WHOSE INNER FILTER IS DIFFERENT
Bobcat : CT120, CT122
Carrier : TRANSICOLD SUPRA
Caterpillar : 301.6C, 301.8C, PS150B, PS150C, PS200B, PS360B
Ditch Witch : 1330
Hitachi : EX17U, HX140B..
$19.00
Model: 1501026
DIAMETER : 7.25 INCHES
SPLINES: 10
CENTER DIAMETER: 0.75 INCHES
SPRINGS: 6
PLEASE NOTE: SOME MODELS OF TRACTORS USE SEVERAL DIFFERENT VARIETIES OF CLUTCH PLATE. FOR YOUR CONVENIENCE, PLEASE BE SURE THE ABOVE DIMENSIONS/PICTURES MATCH YOUR NEED. THE ABOVE PICTURE IS THE EXACT CLUTCH PLATE Y..
$61.00
Model: 1501398
DIAMETER : 8.5 INCHES
SPLINES: 13
CENTER DIAMETER: 0.9375 INCHES
SPRINGS: 6
PLEASE NOTE: SOME MODELS OF TRACTORS USE SEVERAL DIFFERENT VARIETIES OF CLUTCH PLATE. FOR YOUR CONVENIENCE, PLEASE BE SURE THE ABOVE DIMENSIONS/PICTURES MATCH YOUR NEED. THE ABOVE PICTURE IS THE EXACT CLUTCH PLATE ..
$51.00
Model: 1501089
DIAMETER : 7.25 INCHES
PLEASE NOTE: SOME MODELS OF TRACTORS USE SEVERAL DIFFERENT VARIETIES OF CLUTCH PRESSURE PLATE. FOR YOUR CONVENIENCE, PLEASE BE SURE THE ABOVE DIMENSIONS/PICTURES MATCH YOUR NEED. THE ABOVE PICTURE IS THE EXACT CLUTCH PRESSURE PLATE YOU WILL RECEIVE. Fits : ** Allis Ch..
$54.00
Model: 1501190
PLEASE NOTE THE ORIENTATION OF THE CONNECTION TERMINAL ON THIS ITEM. Fits : ** Landini ** - 4000 , 4530 , 5000 , 5500 , 5530 , 5560 , 5830 , 5840 , 5860 , 5870 , 6000 , 6030 , 6040 , 6060 , 6070 , 6500 , 6530 , 6560 , 6830 , 6840 , 6860 , 6870 , 6880 , 7500 , 7530 , 7550 , 7560 , 7830 , 7860 , 787..
$9.00
Model: 1503836
NOTE: THERE ARE MANY UNSPECIFIED APPLICATIONS FOR THIS YOKE ON MANY DIFFERENT MOWING SETUPS. PLEASE VERIFY THE DIMENSIONS OF THE CASTER YOKE YOU NEED AGAINST THE ITEM MEASUREMENT ILLUSTRATION IN THE 2ND LISTING PICTUREFITS THE FOLLOWING WOODS MOWERS WITH APPLICATIONS :59A-1 for IH A, Super A, 100, 1..
$85.00
New
Model: 1504195
NOMINAL ID : 0.75''
ACTUAL ID : 0.781''
OD : 1''
HEIGHT : 0.5''
NOTE: THERE ARE MANY UNSPECIFIED APPLICATIONS FOR THIS SPACER ON MANY DIFFERENT MOWING SETUPS. PLEASE VERIFY THE DIMENSIONS OF THE CASTER YOKE SHAFT YOU NEEDFITS THE FOLLOWING WOODS MOWERS WITH APPLICATIONS :59A-1 for IH A, Super A,..
$6.00