Model: 1502348
PLEASE DO NOT PURCHASE ON MAKE AND MODEL ALONE. PLEASE NOTE THAT THERE CAN BE SEVERAL DIFFERENT SIZED FILTERS THAT CAN FIT ON ANY GIVEN MAKE AND MODEL. THERE CAN BE DIFFERENT SIZE FILTERS USED ON THE SAME MAKE AND MODEL DUE TO OPTIONS LIKE DIESEL/GAS, 3CYL/4CYL, TURBO/NO TURBO, ETC AND THEY ARE NOT ..
$23.00
Model: 1504174
PLEASE DO NOT PURCHASE ON MAKE AND MODEL ALONE. PLEASE NOTE THAT THERE CAN BE SEVERAL DIFFERENT SIZED FILTERS THAT CAN FIT ON ANY GIVEN MAKE AND MODEL. THERE CAN BE DIFFERENT SIZE FILTERS USED ON THE SAME MAKE AND MODEL DUE TO OPTIONS LIKE DIESEL/GAS, 3CYL/4CYL, TURBO/NO TURBO, ETC AND THEY ARE NOT ..
$33.00
Model: 1501873
INLET PIPE IS 2.4'' WHEN MEASURED AT TOP (INSIDE OF ASSEMBLY) Fits : ** Ford ** - 2000 , 2310 , 2600 , 2610 , 2810 , 2910 , 3000 , 3600 , 3610 , 3900 , 3910 , 3910H , 4000 , 4110 , 4600 , 4610 , 4610H , 4830 , 5000 , 5030 , 5110 , 5600 , 5610 , 5700 , 5900 , 6600 , 6700 , 6810 ** Massey Ferguson /..
$38.00
Model: 1503130
PLEASE DOUBLE CHECK THE BELOW DIMENSIONAL INFORMATION FOR THIS TOOL SO YOU GET THE CORRECT ONE FOR YOUR SETUP AND PROJECT.
FIRST SPLINE : 1'' X 10 SPLINE
SECOND SPLINE : 1-7/8'' X 29 SPLINE
PILOT DIAMETER : 0.670'' Fits : ** Ford ** - 2000 , 2150 , 2300 , 2310 , 2600 , 2600V , 2610 , 2810 , 291..
$9.00
Model: 1502909
NOTE : BRAKE SHAFT SEAL ON 2000 3-CYLINDER THROUGH TS100 FORD TRACTORS (1965 - 1993)
2 REQUIRED PER TRACTOR, SOLD INDIVIDUALLY
OD : 1.470''
ID : 0.925''
THICKNESS : 0.360''
Fits : ** Ford ** - 2000 , 2150 , 2300 , 2310 , 2600 , 2600V , 2810 , 2910 , 3000 , 3055 , 3120 , 3150 , 3190 , 330..
$6.00
Model: 1501757
SOLID WOVEN PLATE
DIAMETER : 13 INCHES
SPLINES: 25
CENTER DIAMETER: 1.625''
PLEASE NOTE: SOME MODELS OF TRACTORS USE SEVERAL DIFFERENT VARIETIES OF CLUTCH PLATE. FOR YOUR CONVENIENCE, PLEASE BE SURE THE ABOVE DIMENSIONS/PICTURES MATCH YOUR NEED. THE ABOVE PICTURE IS THE EXAC..
$58.00
Model: 1501758
DIAMETER : 13 INCHES
SPLINES: 10
CENTER DIAMETER: 1.75 INCHES
SPRINGS: 6
PLEASE NOTE: SOME MODELS OF TRACTORS USE SEVERAL DIFFERENT VARIETIES OF CLUTCH PLATE. FOR YOUR CONVENIENCE, PLEASE BE SURE THE ABOVE DIMENSIONS/PICTURES MATCH YOUR NEED. THE ABOVE PICTURE IS THE EXACT CLUTCH PLATE YOU..
$53.00
Model: 1501646
- Fits : ** Allis Chalmers ** - 160 , 5020 , 5030 , 6040 , 8745 , 8765 ** Ford ** - 1800 , 2000 , 2030 , 2031 , 2100 , 2110 , 2111 , 2120 , 2130 , 2131 , 2150 , 2300 , 2310 , 233 , 2600 , 2600N , 2600V , 2610 , 2810 , 2910 , 2N , 3000 , 3055 , 3100 , 3110 , 3120 , 3150 , 3190 , 3230 , 3300 , 3310 ..
$14.00
Model: 1501393
DIAMETER : 13 INCHES
SPLINES: 10
CENTER DIAMETER: 1.75 INCHES
SPRINGS: 10
PLEASE NOTE: SOME MODELS OF TRACTORS USE SEVERAL DIFFERENT VARIETIES OF CLUTCH PLATE. FOR YOUR CONVENIENCE, PLEASE BE SURE THE ABOVE DIMENSIONS/PICTURES MATCH YOUR NEED. THE ABOVE PICTURE IS THE EXACT CLUTC..
$86.00
Model: 1501401
ID: 2.50''
OD.: 4.154''
WIDTH: 0.865''
SEALED ROLLER Fits : ** AGCO ** - LT70 , LT85 ** Allis Chalmers ** - 170 , 175 , 210 , 220 , 7000 , 8745 , 8765 , D21 ** Case ** - 1031 , 1032 , 1070 , 1090 , 1170 , 1175 , 1200 , 930 , 970 ** Challenger ** - MT465 ** David Brown ** - 780 , 880 , 885 ** Fo..
$21.00
Model: 1501661
ID: 2.490''
OD: 4.060''
WIDTH: 0.870''
Sealed bearing.
FOR MASSEY TRACTORS APPLICATIONS ITS DUAL CLUTCH USAGE ONLY UNLESS SPECIFICALLY NOTED. Fits : ** Allis Chalmers ** - 170 , 175 , 210 , 220 , 7000 , D17 ** Case ** - 1030 Comfort King , 1031 , 1032 , 1070 , 1090 , 1170 , 1175 ..
$19.00
Model: 1502460
IMPROVED COMFORT GRIP AS SHOWN
1-5/8'' DIAMETER AT WIDEST POINT, 1.80'' TALL, 5/16''-24 THREAD Fits : ** Allis Chalmers ** - B , CA , RC , WC , WD , WD45 ** B.F. Avery ** - A , R ** Ford ** - 2000 , 2030 , 2100 , 2110 , 2120 , 2130 , 2150 , 2300 , 2310 , 2600 , 2600V , 2610 , 2810 , 2910 , 300..
$12.00