Model: 1503132
PLEASE DOUBLE CHECK THE BELOW DIMENSIONAL INFORMATION FOR THIS TOOL SO YOU GET THE CORRECT ONE FOR YOUR SETUP AND PROJECT.
FIRST SPLINE : 1-1/4'' X 10 SPLINESECOND SPLINE : 1-3/4'' X 27 SPLINEPILOT DIAMETER : 0.590'' Fits : ** John Deere ** - 2040 , 2040S , 2140 , 2355 , 2355N , 2550 , 2555 , 265..
$30.00
Model: 1503083
ID : 0.590''
OD : 1.375''
THICKNESS : 0.430'' Fits : ** John Deere ** - 1010 , 1020 , 1030 , 1040 , 1120 , 1130 , 1140 , 1350 , 1520 , 1530 , 1550 , 1630 , 1640 , 1750 , 1750V , 1850 , 1850V , 1950 , 1950N , 2010 , 2020 , 2030 , 2040 , 2040S , 2120 , 2130 , 2140 , 2150 , 2155 , 2240 , 2250 , 225..
$18.00
Model: 1501646
- Fits : ** Allis Chalmers ** - 160 , 5020 , 5030 , 6040 , 8745 , 8765 ** Ford ** - 1800 , 2000 , 2030 , 2031 , 2100 , 2110 , 2111 , 2120 , 2130 , 2131 , 2150 , 2300 , 2310 , 233 , 2600 , 2600N , 2600V , 2610 , 2810 , 2910 , 2N , 3000 , 3055 , 3100 , 3110 , 3120 , 3150 , 3190 , 3230 , 3300 , 3310 ..
$14.00
Model: 1501871
THIS ITEM IS FOR A SINGLE GASKET.
MOST TRACTORS USE 3 OR 4 GASKETS DEPENDING ON YOUR APPLICATION. Fits : ** John Deere ** - 1020 , 1030 , 1035 , 1040 , 1120 , 1130 , 1140 , 1350 , 1520 , 1530 , 1550 , 1630 , 1635 , 1640 , 1750 , 1830 , 1840 , 1850 , 1850N , 1950 , 1950N , 2020 , 2030 , 204..
$3.00
Model: 1501650
COMES EITHER GREY OR BLACK, IF YOU HAVE A PREFERENCE PLEASE CONTACT US PRIOR TO PURCHASING TO MAKE SURE WE HAVE IN STOCK THE ONE YOU NEED. Fits : ** John Deere ** - 2940 , 2950 , 2955 , 3040 , 3050 , 3055 , 3140 , 3150 , 3155 , 3350 , 3640 Replaces OEM Numbers : AL37167,VPE8033..
$173.00
Model: 1501764
TOTAL LENGTH END TO END WHEN ADJUSTED ALL THE WAY IN : 22''
TOTAL LENGTH CENTER OF BALL JOINT TO CENTER OF OVAL WHEN ADJUSTED ALL THE WAY IN : 19''
TOTAL LENGTH END TO END WHEN ADJUSTED ALL THE WAY OUT : 29''
TOTAL LENGTH CENTER OF BALL JOINT TO CENTER OF OVAL WHEN ADJUSTED ALL THE WAY OUT : 26''..
$63.00
Model: 1503443
TOTAL LENGTH END TO END WHEN ADJUSTED ALL THE WAY IN : 27.5''
TOTAL LENGTH CENTER OF BALL JOINT TO CENTER OF OVAL WHEN ADJUSTED ALL THE WAY IN : 24''
TOTAL LENGTH END TO END WHEN ADJUSTED ALL THE WAY OUT : 32.5''
TOTAL LENGTH CENTER OF BALL JOINT TO CENTER OF OVAL WHEN ADJUSTED ALL THE WAY OUT : ..
$64.00
Model: 1502500
ID : 2.25''
BORE : 3''
THICKNESS : 0.375''
USED AS A FRONT CRANKSHAFT SEAL ON THE LISTED MODELS UNLESS NOTED
FOR THE FOLLOWING JOHN DEERE ENGINES : 3029, 3164, 3179, 4024, 4039, 4039, 4045, 4219, 4239D, 4239T, 4276, 6059, 6068, 6329, 6359T, 6414 Fits : ** John Deere ** - 1020 , 1030 , 1030OU ..
$8.00
Model: 1502879
FITS LEFT HAND SIDE ON THE LISTED APPLICATIONS
LENGTH : 15.75''
WIDTH : 9''
DEPTH : 6.5'' Fits : ** John Deere ** - 2250 , 2350 , 2355 , 2450 , 2550 , 2555 , 2650 , 2750 , 2755 , 2850 , 2940 , 2950 , 2955 , 3040 , 3050 , 3055 , 3140 , 3150 , 3155 , 3255 , 3350 , 4030 , 4040 , 4050 , 4055 , 4230..
$51.00
Model: 1502880
FITS RIGHT HAND SIDE ON THE LISTED APPLICATIONS
LENGTH : 15.75''
WIDTH : 9''
DEPTH : 6.5'' Fits : ** John Deere ** - 2250 , 2350 , 2355 , 2450 , 2550 , 2555 , 2650 , 2750 , 2755 , 2850 , 2940 , 2950 , 2955 , 3040 , 3050 , 3055 , 3140 , 3150 , 3155 , 3255 , 3350 , 4030 , 4040 , 4050 , 4055 , 423..
$69.00
Model: 1502090
- Fits : ** John Deere ** - 1032 Combine , 1042 Combine , 1052 Combine , 1133 Combine , 1144 Combine , 1155 Combine , 1157 Combine , 1158 Combine , 1165 Combine , 1166 Combine , 1169 Combine , 1174 Combine , 1175 Combine , 1177 Combine , 1350 , F1445 , 1550 , 1745F , 1750 , 1845F , 1850 , 1950 , 1..
$19.00
Model: 1502610
FOR THE LISTED MODELS WITH DIESEL ENGINES.
PLEASE VERIFY NEEDED LENGTH AGAINST THE BELOW DIMENSION
LENGTH : 87.5'' Fits : ** John Deere ** - 1040 , 1140 , 1640 , 1840 , 2030 , 2040 , 2040S , 2130 , 2140 , 2150 , 2155 , 2255 , 2350 , 2355 , 2355N , 2550 , 2750 , 2755 , 2840 , 2855N , 2940 , 2950 ..
$14.00