Model: 1503083
ID : 0.590''
OD : 1.375''
THICKNESS : 0.430'' Fits : ** John Deere ** - 1010 , 1020 , 1030 , 1040 , 1120 , 1130 , 1140 , 1350 , 1520 , 1530 , 1550 , 1630 , 1640 , 1750 , 1750V , 1850 , 1850V , 1950 , 1950N , 2010 , 2020 , 2030 , 2040 , 2040S , 2120 , 2130 , 2140 , 2150 , 2155 , 2240 , 2250 , 225..
$18.00
Model: 1501646
- Fits : ** Allis Chalmers ** - 160 , 5020 , 5030 , 6040 , 8745 , 8765 ** Ford ** - 1800 , 2000 , 2030 , 2031 , 2100 , 2110 , 2111 , 2120 , 2130 , 2131 , 2150 , 2300 , 2310 , 233 , 2600 , 2600N , 2600V , 2610 , 2810 , 2910 , 2N , 3000 , 3055 , 3100 , 3110 , 3120 , 3150 , 3190 , 3230 , 3300 , 3310 ..
$14.00
Model: 1501101
DIAMETER : 10 INCHES
LEVERS: 3
SPRINGS: 3
PLEASE NOTE: SOME MODELS OF TRACTORS USE SEVERAL DIFFERENT VARIETIES OF CLUTCH PRESSURE PLATE. FOR YOUR CONVENIENCE, PLEASE BE SURE THE ABOVE DIMENSIONS/PICTURES MATCH YOUR NEED. THE ABOVE PICTURE IS THE EXACT CLUTCH PRESSURE PLATE YOU WILL RECEIVE...
$119.00
Model: 1504412
RIGHT OR LEFT SIDE
REAR HALF Fits : ** John Deere ** - 1020 , 1040 , 1140 , 1520 , 1530 , 1550 , 1630 , 1640 , 1750 , 1840 , 1850 , 1950 , 2010 , 2020 , 2020 ProGator , 2030 , 2040 , 2040S , 2140 , 2240 , 2250 , 2350 , 2355 , 2440 , 2450 , 2510 , 2520 , 2550 , 2555 , 2630 , 2640 , 2650 , 2750 , 2..
$117.00
Model: 1501871
THIS ITEM IS FOR A SINGLE GASKET.
MOST TRACTORS USE 3 OR 4 GASKETS DEPENDING ON YOUR APPLICATION. Fits : ** John Deere ** - 1020 , 1030 , 1035 , 1040 , 1120 , 1130 , 1140 , 1350 , 1520 , 1530 , 1550 , 1630 , 1635 , 1640 , 1750 , 1830 , 1840 , 1850 , 1850N , 1950 , 1950N , 2020 , 2030 , 204..
$3.00
Model: 1502234
FOR CAB DOORS AR73256, AR89196, AR89232, AR103633, AR103634, AR103636 Fits : ** IH ** - 1026 , 1066 , 1206 , 1256 , 1456 , 1466 , 1468 , 1566 , 1568 , 504 , 544 , 656 , 666 , 686 , 706 , 756 , 766 , 806 , 826 , 856 , 966 , Farmall 1026 , Farmall 1066 , Farmall 1206 , Farmall 1456 , Farmall 544 , F..
$7.00
Model: 1501764
TOTAL LENGTH END TO END WHEN ADJUSTED ALL THE WAY IN : 22''
TOTAL LENGTH CENTER OF BALL JOINT TO CENTER OF OVAL WHEN ADJUSTED ALL THE WAY IN : 19''
TOTAL LENGTH END TO END WHEN ADJUSTED ALL THE WAY OUT : 29''
TOTAL LENGTH CENTER OF BALL JOINT TO CENTER OF OVAL WHEN ADJUSTED ALL THE WAY OUT : 26''..
$63.00
Model: 1503443
TOTAL LENGTH END TO END WHEN ADJUSTED ALL THE WAY IN : 27.5''
TOTAL LENGTH CENTER OF BALL JOINT TO CENTER OF OVAL WHEN ADJUSTED ALL THE WAY IN : 24''
TOTAL LENGTH END TO END WHEN ADJUSTED ALL THE WAY OUT : 32.5''
TOTAL LENGTH CENTER OF BALL JOINT TO CENTER OF OVAL WHEN ADJUSTED ALL THE WAY OUT : ..
$64.00
Model: 1503087
THIS IS A BEARING AND CUP AS PICTURED.
PLEASE DOUBLE CHECK THE PART NUMBERS FOR YOUR APPLICATION AGAINST THE ONES IN THE DESCRIPTION TO DETERMINE THE FITMENT ON YOUR EQUIPMENT
BEARINGBORE : 1.312''RADIUS : 0.03''WIDTH : 0.875''
CUPOD : 2.6875''RADIUS : 0.062''WIDTH : 0.6875'' Fits : ** John Dee..
$10.00
Model: 1503122
NOTE : USED ON AXLE APL315, APL325, APL330, APL335, APL735, CAR707, OR MFWD FRONT AXLE DEPENDING ON APPLICATION. PLEASE DOUBLE CHECK THIS DURING THE PROCESS OF ASSESSING FITMENT.
THIS IS A BEARING AND CUP AS PICTURED.
PLEASE DOUBLE CHECK THE PART NUMBERS FOR YOUR APPLICATION AGAINST THE ONES IN ..
$56.00
Model: 1502500
ID : 2.25''
BORE : 3''
THICKNESS : 0.375''
USED AS A FRONT CRANKSHAFT SEAL ON THE LISTED MODELS UNLESS NOTED
FOR THE FOLLOWING JOHN DEERE ENGINES : 3029, 3164, 3179, 4024, 4039, 4039, 4045, 4219, 4239D, 4239T, 4276, 6059, 6068, 6329, 6359T, 6414 Fits : ** John Deere ** - 1020 , 1030 , 1030OU ..
$8.00
Model: 1502879
FITS LEFT HAND SIDE ON THE LISTED APPLICATIONS
LENGTH : 15.75''
WIDTH : 9''
DEPTH : 6.5'' Fits : ** John Deere ** - 2250 , 2350 , 2355 , 2450 , 2550 , 2555 , 2650 , 2750 , 2755 , 2850 , 2940 , 2950 , 2955 , 3040 , 3050 , 3055 , 3140 , 3150 , 3155 , 3255 , 3350 , 4030 , 4040 , 4050 , 4055 , 4230..
$69.00