Model: 1501101
DIAMETER : 10 INCHES
LEVERS: 3
SPRINGS: 3
PLEASE NOTE: SOME MODELS OF TRACTORS USE SEVERAL DIFFERENT VARIETIES OF CLUTCH PRESSURE PLATE. FOR YOUR CONVENIENCE, PLEASE BE SURE THE ABOVE DIMENSIONS/PICTURES MATCH YOUR NEED. THE ABOVE PICTURE IS THE EXACT CLUTCH PRESSURE PLATE YOU WILL RECEIVE...
$119.00
Model: 1501662
ID: 2.260''
OD: 3.650''
WIDTH: 0.800'' Fits : ** AGCO ** - White American 60 , White American 80 ** Allis Chalmers ** - 9130 , 9140 , 9150 , 9170 , 9190 , 9435 , 9455 ** Case ** - 400 , 401 , 403 , 410 , 411 , 413 , 414 , 420 , 430 , 431 , 440 , 441 , 470 , 500 , 530 , 531 , 540 , 541 , 570 ..
$27.00
Model: 1502956
NOTE : THIS KIT IS FOR CAV 3, 4, OR 6 CYLINDER ROTARY DPA INJECTION PUMPS WITH 3 BOLT STYLE DRIVE.
FOR PUMPS WITH KEYED SHAFTS, PLEASE NOTE THAT YOU WILL NEED TO SOURCE TWO (2) 5393-252R SEALS.
Fits : ** Allis Chalmers ** - 5040 , 5050 ** Case ** - 430 , 470 , 530 , 570 , Industrial 480B , Ind..
$10.00
Model: 1502958
NOTE : THIS KIT IS FOR CAV 3, 4, OR 6 CYLINDER ROTARY DPA INJECTION PUMPS WITH 3 BOLT STYLE DRIVE.
FOR PUMPS WITH KEYED SHAFTS, PLEASE NOTE THAT YOU WILL NEED TO SOURCE TWO (2) 5393-252R SEALS. Fits : ** Allis Chalmers ** - 5040 , 5050 ** Case ** - 430 , 470 , 530 , 570 , Industrial 480B , Indust..
$34.00
Model: 1502957
NOTE : THIS KIT IS FOR CAV 3, 4, OR 6 CYLINDER ROTARY DPA INJECTION PUMPS WITH 3 BOLT STYLE DRIVE.
FOR PUMPS WITH KEYED SHAFTS, PLEASE NOTE THAT YOU WILL NEED TO SOURCE TWO (2) 5393-252R SEALS. Fits : ** Allis Chalmers ** - 5040 , 5050 ** Case ** - 430 , 470 , 530 , 570 , Industrial 480B , Indust..
$11.00
Model: 1501870
MANIFOLD COMES EITHER GREY OR GREEN, PLEASE CONTACT US PRIOR TO PURCHASE IF YOU HAVE A PREFERENCE SO WE CAN CHECK STOCK.
COMES WITH 4 GASKETS AS PICTURED.
FOR LISTED APPLICATIONS WITH 4 CYLINDER 202, 219, OR 276-CUBIC INCH DIESEL ENGINES. Fits : ** John Deere ** - 1830 , 2020 , 2030 , 203..
$87.00
Model: 1501871
THIS ITEM IS FOR A SINGLE GASKET.
MOST TRACTORS USE 3 OR 4 GASKETS DEPENDING ON YOUR APPLICATION. Fits : ** John Deere ** - 1020 , 1030 , 1035 , 1040 , 1120 , 1130 , 1140 , 1350 , 1520 , 1530 , 1550 , 1630 , 1635 , 1640 , 1750 , 1830 , 1840 , 1850 , 1850N , 1950 , 1950N , 2020 , 2030 , 204..
$3.00
Model: 1503980
- Fits : ** John Deere ** - 1520 , 1830 , 2020 , 2030 , 2120 , 2440 , 2630 , 2640 , Industrial 300B , Industrial 301A , Industrial 302 , Industrial 302A , 380 Forklift , Industrial 400 , Industrial 401 , Industrial 401B , Industrial 401C , 480 Forklift , 480A Forklift , 480B Forklift Replaces OEM..
$534.00
Model: 1501764
TOTAL LENGTH END TO END WHEN ADJUSTED ALL THE WAY IN : 22''
TOTAL LENGTH CENTER OF BALL JOINT TO CENTER OF OVAL WHEN ADJUSTED ALL THE WAY IN : 19''
TOTAL LENGTH END TO END WHEN ADJUSTED ALL THE WAY OUT : 29''
TOTAL LENGTH CENTER OF BALL JOINT TO CENTER OF OVAL WHEN ADJUSTED ALL THE WAY OUT : 26''..
$63.00
Model: 1503443
TOTAL LENGTH END TO END WHEN ADJUSTED ALL THE WAY IN : 27.5''
TOTAL LENGTH CENTER OF BALL JOINT TO CENTER OF OVAL WHEN ADJUSTED ALL THE WAY IN : 24''
TOTAL LENGTH END TO END WHEN ADJUSTED ALL THE WAY OUT : 32.5''
TOTAL LENGTH CENTER OF BALL JOINT TO CENTER OF OVAL WHEN ADJUSTED ALL THE WAY OUT : ..
$64.00
Model: 1503087
THIS IS A BEARING AND CUP AS PICTURED.
PLEASE DOUBLE CHECK THE PART NUMBERS FOR YOUR APPLICATION AGAINST THE ONES IN THE DESCRIPTION TO DETERMINE THE FITMENT ON YOUR EQUIPMENT
BEARINGBORE : 1.312''RADIUS : 0.03''WIDTH : 0.875''
CUPOD : 2.6875''RADIUS : 0.062''WIDTH : 0.6875'' Fits : ** John Dee..
$12.00
Model: 1502500
ID : 2.25''
BORE : 3''
THICKNESS : 0.375''
USED AS A FRONT CRANKSHAFT SEAL ON THE LISTED MODELS UNLESS NOTED
FOR THE FOLLOWING JOHN DEERE ENGINES : 3029, 3164, 3179, 4024, 4039, 4039, 4045, 4219, 4239D, 4239T, 4276, 6059, 6068, 6329, 6359T, 6414 Fits : ** John Deere ** - 1020 , 1030 , 1030OU ..
$8.00